Seat Rail Cover, Removing And Installing, Standard Seat, Sport Seat, Super Sport Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Remove The Bolts From The Seat Rail:

Standard seat and sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
Standard and Power Sport Seat, Comfort Seat and Super Sport Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .

-- Unclip the locking tabs -3, 4 and 5- on the cover -2- from the seat rail.

Fig 1: Unclipping Retaining Tabs On Cover From Seat Rail And Removing Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -1- forward as parallel as possible to the seat rail.