Seat Pan, Disassembling And Assembling, Lower Frame: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The upper and lower seat pan frames can be separated and connected without removing the cushion.
Only the seat position sensor and the seat belt latch must be installed in the new seat pan lower frame.
The seat pan upper and lower frames cannot be separated on the following front seats: manual Standard and manual Sport seats.
The seat pan upper and lower frames can be separated and replaced separately on the following front seats: power Standard seat, power Sport seat, Comfort and Super Sport seats.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and Parts Information prior to starting procedure.
Mandatory Replacement Parts
- Bolts