LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Seat Height Adjuster, Removing And Installing >> Seat Height Adjustment, Removing And Installing, Manual Standard Seat/Sport Seat >> Removing

Seat Height Adjustment, Removing And Installing, Manual Standard Seat/Sport Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Remove The Front Seat: 

-- Attach the front seat to the :VAS6136  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the sill-side trim. Refer to SILL-SIDE TRIM, REMOVING AND INSTALLING, MANUAL STANDARD/SPORT SEATS .

-- Remove the bolts -2-.

Fig 1: Identifying Bolts
GWWA72-10672Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat height adjustment lever -1-.

-- Remove the lock washer -1-.

Fig 2: Identifying Lock Washer
GWWA72-10670Courtesy of AUDI OF AMERICA, LLC
NOTE:

The bolts -1- and the bolt -3- are different lengths.

Fig 3: Identifying Bolts
GWWA72-10671Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 3-.

-- Remove the seat height adjuster -2-.