LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Seat Depth Adjuster Trim, Removing And Installing >> Removing

Seat Depth Adjuster Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Remove The Front Seat: 

-- Attach the front seat to the :VAS6136  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Equipment level with storage compartment: remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .

-- Move the seat depth adjuster all the way forward.

Fig 1: Unclip Tabs On Trim Using 3409
GWWA72-11562Courtesy of AUDI OF AMERICA, LLC

-- Unclip the tabs -arrows- on the trim -1- using the :3409  .

-- Remove the trim from the seat depth adjuster.