Seat Angle Adjustment Motor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat:
- Standard and Power Sport Seat, Comfort Seat and Super Sport Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Disconnect the connector -3- on the seat angle adjustment motor -4-.
-- Remove the bolt -2- for the adjustment spindle -5- (preset by the manufacturer).
-- Do not damage the bushings -1- inserted in the bearing areas -2- when removing the bolt.
CAUTION:
- The Bushings Cannot Be Replaced With Workshop Materials.
- If The Bushings Are Damaged, The Corresponding Assembly Parts Must Be Replaced.
-- Remove the screws -1-.
-- Remove the seat angle adjustment motor from the front seat.