Retaining Plate Pop Rivet Nut For DVD Player, Riveting Retroactively To Backrest Frame: Procedure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Internally Threaded Pop Rivet Pliers VAS 5073

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover with the front backrest padding. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .

-- Insert the M6 threaded pin -item 1- into the :VAS5073A and install the pop rivet nut -2- all the way.

-- Insert the pop rivet nut all the way into the hole on the backrest frame -3- and then push together with the pop rivet pliers.

-- Remove the threaded pin with the pop rivet nut pliers again.

-- Install the retaining plate for the DVD player. Refer to DVD PLAYER RETAINING PLATE, REMOVING AND INSTALLING .