Overview - Seat Angle Adjuster

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Seat Pan, Seat Angle Adjuster (Manual)

Courtesy of AUDI OF AMERICA, LLC

Handle
- For seat angle adjuster
- Removing and Installing. Refer to SEAT ANGLE ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
Clip
- Replace the seat angle adjuster handle each time it is removed
- Installation position. Refer to THE SPRINGS -ARROWS- (QUANTITY: 2) ON THE CLIP -2- MUST BE ON THE INNER SIDE OF THE LEVER -1-. .
Bolt
- 6.5 Nm
- Self-locking
- Always replace if removed
- Clean the threaded hole for the bolt with a thread tap, for example
Step Pin
- 6 Nm
- Self-locking
- Always replace if removed
- Threaded hole for the step pin must be cleaned, for example, with thread cutter
Seat Angle Adjuster
- Removing and Installing. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .