Overview - Modular Wiring Routing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Modular Wire Routing Overview

Courtesy of AUDI OF AMERICA, LLC

Front Seat
Cable Holder
- Note the installation position. Refer to THE BEGINNING OF THE CORRUGATED TUBE -4- SHOULD BE PLACED IMMEDIATELY AFTER THE CLIP -2- OR CABLE TIE AROUND THE WIRING HARNESS -3-. .
Corrugated Tube Lower Section
- Note the installation position. Refer to THE BEGINNING OF THE CORRUGATED TUBE -4- SHOULD BE PLACED IMMEDIATELY AFTER THE CLIP -2- OR CABLE TIE AROUND THE WIRING HARNESS -3-. .
Wiring Harness
- Observe the information for routing the wiring harness in the corrugated tube. Refer to MODULAR WIRE ROUTING WITH CORRUGATED TUBE ON FRONT SEAT
Corrugated Tube Upper Section
- Note the installation position. Refer to THE BEGINNING OF THE CORRUGATED TUBE -4- SHOULD BE PLACED IMMEDIATELY AFTER THE CLIP -2- OR CABLE TIE AROUND THE WIRING HARNESS -3-. .