LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Overview - Backrest Adjustment Motor

Overview - Backrest Adjustment Motor

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For clarity, the backrest is shown without the cushion, cover and seat pan.

Fig 1: Backrest Adjustment Motor Overview
GWWA72-10776Courtesy of AUDI OF AMERICA, LLC
  1. Backrest Frame
  2. Nut
    • 6 Nm
    • Replace
  3. Washer
  4. Shaft
    • The threads must be cleaned before installing the nut -item 2- (for example, with a thread tap).
    • Coat the threads on the shaft with locking fluid before installing the nut. Refer to Parts Information for the locking fluid.
  5. Bolt
    • 7.5 Nm
    • Replace
    • Use locking fluid when installing the bolt. Refer to Parts Information for the locking fluid.
  6. Backrest Adjustment Motor
scientia non olet · About LEMON Manuals