Backrest Cover, Removing And Installing, Two Piece: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Upper Backrest Crossmember -1-

Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal And Note The Following:

-- First push the upper hook -2- under the upper backrest crossmember -1-.

-- Tilt the backrest cover downward and engage the side locking tabs -3 and 5- and the lower hooks -4-.

-- Make sure the locking tabs on the side fit correctly into the backrest frame and the lower hooks are pushed correctly over the backrest frame.

-- Press the backrest cover firmly into the areas marked with circles -arrows- in the direction of the backrest.

Fig 2: Backrest Cover

Courtesy of AUDI OF AMERICA, LLC

-- Check if the backrest cover is correctly locked.

It Must Not Be Possible To Move The Backrest Cover At The Bottom.