Seat Heating Element, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Begin bonding in center area of seat bench heating element

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bench seat cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, BENCH SEAT .

-- Separate the cover from the cushion. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .

-- Cut the wire -1- directly at the old bench seat heating element -3-.

NOTE:

The old bench seat heating element remains on the cushion -2- and the new bench seat heating element is bonded over it.

Ignore the -arrows-.