Cover And Cushion, Removing And Installing, Rear Seat Backrest: Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and Note The Following:
-- When installing a new backrest shell and before mounting the cushion, peel the protective film off the adhesive strips and on the front side of the backrest shell.
-- Use new two-sided tape if reusing the old backrest shell.