Seat Pan Cover And Cushion, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Bucket Seat Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan. Refer to SEAT PAN, REMOVING AND INSTALLING .

-- Loosen the Velcro fastener -2-.

-- Pry the clamping strip at the edge of the seat cover -3- out from around the guide on the seat pan.

-- Disengage the rear retaining strip -1- on the seat pan.

-- Disengage the clamping strip -1- from the brackets -arrow- on the seat pan cushion and loosen the Velcro fastener -3- on the seat pan cushion -2-.

Fig 2: Detaching Retaining Strip -1- From Holders -Arrow- At Seat Pan Cushion

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan cover.

-- Remove seat bolster inflation adjuster -2- from retaining bracket -3- for the seat pan -arrow-.

Fig 3: Disengaging Flap With Air Cushion For Seat Bolster Inflation Adjustment

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the pneumatic hose -1- for seat bolster inflation adjuster at the Y-piece.

-- Remove the seat pan cushion with the seat bolster inflation adjuster.