Headrest Cover And Cushion, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the head restraints:
- Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH SLIDING LOCKING MECHANISM .
- Refer to HEADREST, REMOVING AND INSTALLING, POWER HEADREST .
-- Open the side locks -arrows- on the cover -1-.
-- Insert the :3409 in the direction of -arrow A- between the cover zipper -1-.
-- Bend the lower U-channel -3- in the direction of -arrow B-.
-- Pull the upper side of the cover with the flat channel -2- out of the U-channel.
-- Open the main zipper by inserting the :3409 between the zipper and the cover.
-- Bend the lower U-channel -1- in the direction of -arrow A-.
-- Pull the upper side of the cover with the flat channel -2- out of the U-channel.
NOTE:
The cover must be completely open to remove the cushion.
-- Remove the cushion -1- from the cover -2-.