Headrest Cover And Cushion, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the cushion -1- with the correct shape into the cover -2-.
-- Insert the headrest support in the cushion with the cover.
-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.
-- Slide the edge of the fabric edge with the flat channel into the U-channel -5-.
-- Closing the side zippers is similar to the closing the main zipper.
-- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.
-- Ensure the cover sits on the cushion -3- without any wrinkles or seam markings.
Further installation is the reverse order of removal.