LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1359 (Seat Upholstery, Covers (Cabriolet)) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing >> Driver And Front Passenger Backrest Heating Element -Z7- And -Z9-, Removing And Installing, Super Sport Seat >> Removing

Driver And Front Passenger Backrest Heating Element -Z7- And -Z9-, Removing And Installing, Super Sport Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Backrest Heating Element, Super Sport Seat
GWWA74-10227Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover with the cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, SUPER SPORT SEAT .

-- Separate the cover from the cushion. Refer to BACKREST COVER AND CUSHION, SEPARATING, SUPER SPORT SEAT .

-- Cut the wire -3- off directly at the old backrest heating element -2-.

NOTE:

The old backrest heating element remains on the cushion -1- and the new backrest heating element is bonded over it.