Driver And Front Passenger Seat Heating Element -Z6- And -Z8-, Removing And Installing, Standard Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Heating Element, Standard Seat

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan cover and cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .

-- Separate the cover from the cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .

-- Cut the wire -3- off directly at the old seat heating element -2-.

NOTE:

The old seat heating element remains on the cushion -1- and the new seat heating element is bonded over it.

Ignore -A through E- and -arrows-.