Driver And Front Passenger Seat Heating Element -Z6- And -Z8-, Removing And Installing, Comfort Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seat Heating Element, Comfort Seat

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan cover and cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITH SEAT DEPTH ADJUSTER .

-- Separate the cover from the cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, SEAT PAN WITH SEAT DEPTH ADJUSTER .

-- Cut the wire -3- off directly at the old seat heating element -2-.

-- Cut through the connection points -arrows-.

-- Carefully loosen the seat heating elements -D- and -E- from the bonding and remove them.

NOTE:

The spacer fabric must not be damaged.

The old seat heating elements -A, B and C- remain on the cushion and the new seat heating element is bonded over them.