LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1357 (Wiper/Washer Systems (Cabriolet)) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Reservoir, Removing And Installing >> Washer Fluid Reservoir Filler Tube, Removing And Installing >> Removing

Washer Fluid Reservoir Filler Tube, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Plenum Chamber Cover
GWWA92-10166Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

-- Remove the nut -1- and tilt the windshield wiper fluid container filler tube slightly upward -arrow A-.

Fig 2: Identifying Filler Neck With Filler Tube From Washer Fluid Reservoir And Opening In Body
GWWA92-10091Courtesy of AUDI OF AMERICA, LLC

-- Remove the filler neck -2- with filler tube from the washer fluid reservoir and the body opening -arrow B-.