Overview - Impact Absorber, Vehicles From My 2012
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Horn
- Removing and installing. Refer to HORN .
- Impact Member
- Removing and installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2012 .
- Rivet
- Quantity: 2
- Counterholder
- For mount with adjusting mechanism
- Removing and installing. Refer to BUMPER COVER MOUNT COUNTERHOLDER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Nut
- 4 Nm
- Impact Member Mount
- Removing and installing. Refer to IMPACT MEMBER MOUNT, REMOVING AND INSTALLING, VEHICLES FROM MY 2012 .
- Bolt
- 55 Nm
- Quantity: 3
- Nut
- 20 Nm
- Quantity: 2
- Nut
- Tightening specification. Refer to HORN .