Bumper Cover Mount COUNTERHOLDER, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the tabs in direction of -A arrows- and remove the air guide -1- in direction of -B arrow-.
-- Remove the bolt -1- from the headlamp housing mount.
-- Drill off the rivet heads -arrows-, strike the rivet shafts and remove the counterholder -2-.