LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1343 (Bumpers (Cabriolet)) >> 63 Bumpers >> Front Bumper >> Attachments, Removing And Installing >> Attachments, Removing And Installing, Except AUDI RS5 >> Headlamp Washer System Spray Nozzle Cover

Headlamp Washer System Spray Nozzle Cover

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
GWWA63-10223Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Removing 

-- Fold the washer nozzle cover -1- upward -arrow A-.

-- Using a screwdriver on the inner side, pry the spray nozzle cover -1- off the mount -2- -arrow B- and disengage it at the opposite side.

Installing 

Install in reverse order of removal. Note the following:

-- Press the spray nozzle cover on until it engages audibly.