LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 (Exterior Equipment (Cabriolet)) >> 66 Exterior Equipment >> Noise Insulation >> Overview - Noise Insulation >> Overview - Noise Insulation, Except AUDI RS5 >> Rear Noise Insulation

Rear Noise Insulation

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
GWWA66-10283Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Rear Noise Insulation
    • Loosen the 3 rear quick-release fasteners on the noise insulation.
    • Loosen the quick-release fasteners -6- and remove the noise insulation toward the rear.
  2. Crossbrace
  3. Transmission Crossmember
  4. Spring Nut
    • Slide into the transmission crossmember as shown
  5. Washer
  6. Quick Release
    • Rotate 180° to the left to remove.
    • When installing, the connection must engage when rotating.
  7. Spring Nut
    • Slide sideways into the crossbrace.
scientia non olet · About LEMON Manuals