LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 (Exterior Equipment (Cabriolet)) >> 66 Exterior Equipment >> Noise Insulation >> Overview - Noise Insulation >> Overview - Noise Insulation, Except AUDI RS5 >> Front Noise Insulation

Front Noise Insulation

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
GWWA66-10291Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Noise Insulation
    • Removing:
    • The front wheel spoiler is removed. Refer to OVERVIEW - FRONT WHEEL SPOILER .

      -- Remove the bolts -1 and 2- and remove the noise insulation toward the rear under the bumper.

    • When installing, slide the front noise insulation in under the bumper.
  2. Bolt
    • 5 Nm
    • Quantity: 2
  3. Quick Release
    • Rotate 180° to the left to remove.
    • When installing, the connection must engage when rotating.
  4. Washer
  5. Rear Noise Insulation
  6. Lock Carrier
scientia non olet · About LEMON Manuals