Sill Panel Trim, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the adhesive residue using :VAS6349 .
-- Clean the adhesive surface on the vehicle body with Cleaning Solution:D 009 401 04 .
-- Remove the protective film from the adhesive tape -2-.
-- Position the sill panel -3- on the sill -1- and push the clips into the mounts -arrows-.
-- Press the sill panel on the entire length of the sill using the : 3356
- Resting time is approximately four hours at room temperature