Terminal 30 Wire Junction 2 -TV22-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Plenum Chamber Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

-- Release the retainer -arrow A- and open the cover -arrow B-.

Fig 2: Opening Terminal Box Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the wires -1, 2, 3, 5, 6 and 9-.

Fig 3: Identifying Terminal 30 Wire Junction 2 Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -8- and remove the Terminal 30 Wire Junction 2 -TV22- from the tower brace.

NOTE:

Ignore items -4, 7 and 10-.