LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1340 (Wiring (Cabriolet)) >> 97 Wiring >> Control Modules >> Garage Door Opener Control Module, Removing And Installing >> Garage Door Opener Control Module -J530-, Removing And Installing >> Removing

Garage Door Opener Control Module -J530-, Removing And Installing : Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Garage Door Opener Control Module, Removal
GWWA96-10461Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER .

-- Disconnect the connector -1-.

-- Release the clip -arrow- and remove the Garage Door Opener Control Module -J530- -2- from the frame.



Fig 1: Identifying Garage Door Opener Control Module, Removal
GWWA96-10995Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to LOCK CARRIER .

-- Open the tab -4- -arrow- and remove the control module -2- from the mount -3-.

-- Disconnect the connector -1-.