Starter, Removing And Installing, Vehicles With 2.7L And 3.0L TDI Engine: Removing

-- With the ignition switched off, disconnect the battery ground cable. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the front exhaust pipe. Refer to EXHAUST PIPES/MUFFLERS .

-- Remove the generator. Refer to GENERATOR, REMOVING AND INSTALLING, VEHICLES WITH 2.7L AND 3.0L TDI ENGINE .

-- Remove the right engine mount. Refer to EXHAUST PIPES/MUFFLERS [For engine(s) CALA] .

Vehicles With Engine Generation I: 

Fig 1: Removing Screws

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and -2-.

-- Press the lower right coolant pipe to the side.

All Vehicles: 

Fig 2: Removing Nut And Freeing Up Ground Wire

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1- and free up the ground wire on the right engine support.

-- Remove the bolts -arrows- and the right engine support.

-- Disconnect the connector -3- by sliding the retainer back and pressing the release down.

Fig 3: Disconnecting Starter Electrical Connector Specifications

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the wire -2- from the starter.

-- Remove the bolts -1- and -4- and remove the starter.