Overview - Starter [CAEB, CPMA, CPMB, CAED, CCBA, CGXC, CTUB]

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Starter Components

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specifications:
  - Vehicles with manual transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING [For transmission(s) 0AW] .
  - Vehicles with multitronic transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING [For transmission(s) 0AW] .
  - Vehicles with DSG transmission. Refer to appropriate service information. .
Spacer Sleeve
- Only for 4-cylinder engines
Starter
- Removing and installing:
  - Vehicles with 2.0L TFSI engine. Refer to STARTER, REMOVING AND INSTALLING [CAEB, CPMA, CPMB, CAED] .
  - Vehicles with a 3.0L TFSI engine. Refer to STARTER, REMOVING AND INSTALLING [CCBA, CGXC, CTUB] .
Terminal B+
Nut
- 15 Nm
Connector
Bolt
- Tightening specifications:
  - Vehicles with manual transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING [For transmission(s) 0AW] .
  - Vehicles with multitronic transmission. Refer to appropriate service information. .
  - Vehicles with DSG transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .