Ribbed Belt Pulley Without Freewheel, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following:

-- Turn the generator shaft counterclockwise to tighten.

-- Clip protective cap onto generator pulley.

Tightening specification

Component	Nm
Ribbed belt pulley to generator	65