A/C Compressor -G111-

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Switch pressures, removing and installing switches as well as switch arrangement and version. Refer to vehicle specific refrigerant circuit REFRIGERANT CIRCUIT - CABRIOLET (1 OF 3) / REFRIGERANT CIRCUIT - CABRIOLET (2 Of 3) /REFRIGERANT CIRCUIT (R134a) - CABRIOLET (vehicle-specific repair information).

Inductive sensor

The sensor pulses (4 per compressor revolution) and the engine speed enable the Front A/C Display Control Head -E87- or the Climatronic Control Module -J255- to calculate belt slip.

If the belt slip exceeds a specified value, the compressor is switched off by the control module via the A/C clutch.

NOTE:

Installed in Audi vehicles with an A/C compressor driven the a ribbed belt and with Zexel compressor. Refer to REFRIGERANT CIRCUIT - CABRIOLET / A/C COMPRESSOR / REFRIGERANT CIRCUIT (R134a) - CABRIOLET (vehicle-specific repair information).

Beginning from production year 2006, the name of the "Zexel" A/C compressor was changed from "Zexel" to "Valeo".