Condenser Distinguishing Marks

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Identifying a condenser made by "Denso" -A-

Fig 1: Identifying Condenser Distinguishing Marks

Courtesy of AUDI OF AMERICA, LLC

The upper sealing strip -B- is U-shaped.
Condenser manufacturer part number and manufacturer information -C- (currently printed directly on it). For the correct allocation. Refer to the Parts Information.
Receiver/dryer -D- integrated on the condenser, dryer cartridge with removed plastic screw (cover) replaceable. Refer to DRYER BAG/DRYER CARTRIDGE, REMOVING AND INSTALLING .

NOTE:

There are different versions of this condenser in its construction, with different refrigerant R134a capacities (recognizable, for example, by the part number 8K0 xxx xxx or 8T0 xxx xxx). Refer to REFRIGERANT R134A CAPACITIES, REFRIGERANT OIL AND APPROVED REFRIGERANT OILS ; for allocation. Refer to the Parts Information.

Capacities and other information for refrigerant R1234yf. Refer to TECHNICAL DATA .

Identifying a condenser made by "Showa/Keihin" -A-

Fig 2: Identifying A Condenser Made By "Showa / Keihin"

Courtesy of AUDI OF AMERICA, LLC

The upper sealing strip -B- is flat.
Condenser manufacturer part number and manufacturing information -C- (currently on a label glued to it). For the correct allocation. Refer to the Parts Information.
Receiver/dryer -D- attached to the condenser (the receiver/dryer can be replaced. Refer to RECEIVER/DRYER, REMOVING AND INSTALLING ).

NOTE:

Capacities and other information for refrigerant R1234yf. Refer to REFRIGERANT R1234YF CAPACITIES .