Control Arm Ball Bearing, Replacing: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Pressing Out And In Bearing For Track Control Arm (On Wheel Bearing Housing Side)
Special Tools And Workshop Equipment Required
- Press Plate:VW402
- Press Piece - Multiple Use:VW412
- Subframe Bushing Tool Kit:3301
- Bearing Installer - Control Arm:3346
- Hydraulic Press - Bushing Tool Kit:T10030
- Assembly Paste
NOTE:
Hold Track Control Arm Firmly In Position While Pressing Bearing Out And In.