Triple Roller Joint AAR 2600 I Or 3300 I, Disassembling
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Clamp drive axle horizontally in vise.
NOTE:
Use vice clamp jaw protectors.
Make sure that drive axle is not damaged.
-- Mark the location of the joint to the drive axle
NOTE:
If they are not marked and are not installed in their previously installed positions, noises may occur later during driving operation.
A water-proof felt pen is well-suited for marking.
-- Open clamps -arrows-.
-- Slide back protective boot.