SERVOTRONIC Solenoid Valve -N119-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Replacement is only possible when the steering gear is removed.
-- Remove the steering gear. Refer to STEERING GEAR, REMOVING AND INSTALLING, HYDRAULIC POWER STEERING GEAR .
-- Always the clean steering gear -6- in the Solenoid Valve -- -3- area.
-- Make sure dirt cannot get into the steering gear -6-.
-- Disconnect the connector -8-.
-- Make sure dirt cannot get into the connector -8-.
-- Remove the bolts -1 and 2-.
-- Remove the Solenoid Valve -- -3- from the steering gear -6-.
-- Remove the screen -7- from the steering gear -6- and clean steering gear, if necessary.