Steering Column: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Torque wrench:V.A.G 1331
WARNING:
Note the following before removing the steering column:
Create a sketch showing the:
- Routing of the electrical wiring harnesses
- Securing the electrical wiring harnesses
- Cable tie locations
This especially applies to the wiring harness to the electronic steering column lock control module -J764-.
Note The Following Before Installing The Steering Column:
- Route the electrical wiring harnesses exactly the way they were before removal.
- Secure the electrical wiring harnesses exactly the way they were before removal.
- Install all the cable ties that were loosened or cut in the same locations when installing the steering column.
- Make sure the wiring harness to the electronic steering column lock control module is not pinched and does not come into contact with sharp edges when adjusting the steering column.