SERVOTRONIC Solenoid Valve -N119-: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Servotronic Solenoid Valve Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replacement Is Only Possible When The Steering Gear Is Removed.

-- Steering gear, removing; refer to STEERING GEAR .

-- Always clean steering gear -6- in solenoid valve -3- area.

-- Make sure that no dirt enters steering gear -6-.

-- Separate connector -8-.

-- Make sure no dirt enters the connector -8-.

-- Remove bolts -1- and -2-.

-- Remove solenoid valve -3- from steering gear -6-.

-- Remove screen -7- from steering gear -6-, clean steering gear if necessary.