Reservoir In The Bracket

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Reservoir In Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Insert the reservoir with the tab -1- in the opening in the bracket -2-.

Line Bracket for Lines to the Longitudinal Member

Fig 2: Line Bracket For Lines to the Longitudinal Member

Courtesy of AUDI OF AMERICA, LLC

-- Secure the return line -1- to the left longitudinal member using the line bracket -3-. Insert the return line -1- with the marking -arrow A- in the line bracket -3-.

-- Insert the intake hose -4- in the line bracket -6-. Clip the line bracket -6- into the bracket -5-.

-- Secure the return line -2- with the nuts -7- and the bracket -5- on the left longitudinal member.

Return line from the hydraulic fluid cooler to the reservoir
Return line from the power steering gear to the hydraulic oil cooler

-Arrow- points in direction of travel.

Installation location on the return line connection -2-, refer to HOSE LINES TO RESERVOIR, HYDRAULIC FLUID COOLER AND RETURN LINE INSTALLED POSITION .

Return line -1- and intake hose -4- installation location on the reservoir, refer to HOSE LINES TO RESERVOIR, HYDRAULIC FLUID COOLER AND RETURN LINE INSTALLED POSITION .