LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (STEERING (2 Of 2) (CABRIOLET)) >> 48 Steering >> Description And Operation >> Lines And Hoses Overview [CAEB, CPMA] >> Notes

Lines And Hoses Overview [CAEB, CPMA]: Notes

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Line And Hose Securing Elements Overview 

Fig 1: Lines And Hoses Overview
GWWA48-10422Courtesy of AUDI OF AMERICA, LLC
  1. Reservoir bracket to body, refer to Figure.
  2. Reservoir in bracket, refer to Figure.
  3. Bolt in bracket, refer to Figure.
  4. Return line clip to the longitudinal member, refer to Figure and intake hose clip to the pressure pipe Figure.
  5. Hydraulic oil cooler to condenser, refer to Figure.
  6. Power steering pump in bracket, refer to POWER STEERING PUMP, VEHICLES WITH DYNAMIC STEERING [CAEB, CPMA]  or POWER STEERING PUMP, VEHICLES WITHOUT DYNAMIC STEERING [CAEB, CPMA] .
  7. Pressurized line to crossbrace, refer to Figure.
  8. Pressure line connection installation location, refer to Figure.
  9. Pressurized line to the engine mount, refer to Figure.
  10. Return line to the subframe, refer to Figure, return line bracket to the longitudinal member, refer to Figure.