LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1310 (Interior Trim (Cabriolet)) >> 70 Interior Trim >> Convertible Top Compartment >> Variable Convertible Top Compartment Enclosure Trim, Removing And Installing >> Removing

Variable Convertible Top Compartment Enclosure Trim, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Convertible Top Compartment Cover Locking Motor -V222-
GWWA70-11083Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.

-- Support the convertible top with a suitable wood rod.

-- Slide the trim -1- to the right and off the left mounting pin -3- -arrow A-.

Fig 2: Sliding Trim -1- To Right And Off Left Mounting Pin -3- -Arrow A-
GWWA70-11001Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the trim downward from the left mounting pin -arrow B-.

-- Remove the trim from the right mounting bracket -2- -arrow C-.

-- Remove the variable convertible top compartment enclosure -2- from the trim -1- -arrow- and remove the trim.

Fig 3: Removing Variable Convertible Top Compartment Enclosure -2- From Trim -1- -Arrow- And Remove Trim
GWWA70-11108Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.