Vehicle Diagnostic Tester

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Vehicle Diagnostic Tester

-- Connect the Vehicle Diagnostic Tester.

-- Switch tester on.

The tester is ready for use when the vehicle symbol is displayed.

-- Turn on the ignition.

-- Touch the field/the button on the screen: Guided Fault Finding

-- Select In Succession:

Brand
Type
Model year
Version
Engine code

-- Confirm Data Entered.

Wait until the tester has checked all control modules in vehicle.

-- Press the Go to button and select "Function/Component Selection ".

-- Select "Suspension"

-- Select "Brake system"

-- Select "001 - OBD-capable system" in the display.

-- Select on display "Anti-lock brake system...".

-- Select on display "Function".

Now, all possible functions of the anti-lock brake system (ABS) installed in the vehicle will be displayed.

-- Select desired function on display.