INSTALLING CLAMP ON 88 mm OR 100 mm DIAMETER OUTER JOINT

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Clamping Sleeve On Outer Joint

Courtesy of AUDI OF AMERICA, LLC

-- Engage the clamp at the first catch by hand.

-- Close the clamp using :3340 .

Fig 2: Close Clamp Using Pliers 3340

Courtesy of AUDI OF AMERICA, LLC

Insert the :3340 at the front of the clamp, as shown in the illustration.