Tires, Rolling Noises, General Information

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Rolling noise perceived by the human ear is caused by vibrations transmitted from the noise source to the ear via the air.

Here we are interested in noises created by certain characteristics of the tires as well as the effects of rolling (noise source).

The cause for the noise generation depends primarily on the combination of road surface and tire.

The surface structure and material of the road surface also have a strong influence on the rolling noise. For example, the noise level on a wet road is substantially higher than on a dry road.

The design of the tread has a great influence on the noise generation. Tires with cross grooves at an angle of 90° are louder than tires with grooves running diagonally.

Small tread blocks are unstable. Due to strong deformation, the air is excited by the rolling tires. Air vibrations occur, which will generate noises.

Wider tires are louder. They require more tread grooves for water displacement. Air is displaced by these tread grooves while rolling, which also cause air vibrations.

Other effects which also have an influence on noise generation:

Tire vibration is the main cause of rolling noise. The noise is generated by the excitation of the air column in the grooves.

Air pumping is the compression and expansion of air as the contact patch comes in contact with the road surface and the tread blocks are deformed.