Overview - Vacuum Pump

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Only The Vacuum Pump Is Shown In The Illustration And Not The Installation Location

Fig 1: Identifying Vacuum Pump Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 9 Nm
- Remove to remove the pump.
  NOTE:
  The pump is not designed to be disassembled.
Vacuum Pump
Vacuum Hose
- Secure with hose clamps that match those used in production service information.
Bolt
- 5 Nm
  NOTE:
  Installing the bolt depends on the model.
  
  Alternatively, secure the vacuum hose with the hose clamp for the vehicle version service information.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.
O-Ring
- Replace
  NOTE:
  Installation of the O-ring depends on the model.