LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Hydraulic Components - Brake System (Cabriolet)) >> 47 Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve, Removing And Installing, RS 5 >> Removing

Check Valve, Removing And Installing, RS 5: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Open the hose clamp on the vacuum hose using suitable pliers.

-- Disconnect the vacuum hose from the pump.

-- Remove the vacuum hose on the left and right of the check valve -3-.

Fig 1: Brake System Vacuum Pump Components
GWWA47-10071Courtesy of AUDI OF AMERICA, LLC
CAUTION:

Be careful not to kink or damage the vacuum hose. Replace the vacuum hose if damaged.

-- Remove the check valve from the vehicle.