LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Hydraulic Components - Brake System (Cabriolet)) >> 47 Hydraulic Components >> Vacuum System >> Brake Electric Vacuum Pump, Removing And Installing >> Brake Electric Vacuum Pump, Removing And Installing, Except RS 5 >> Installing

Brake Electric Vacuum Pump, Removing And Installing, Except RS 5: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal.

-- Press the right and left clip -arrow- into the bracket by hand and secure the Brake System Vacuum Pump -V192-.

Fig 1: Identifying Brake System Vacuum Pump V192 Upward From Bracket
GWWN47-0234Courtesy of AUDI OF AMERICA, LLC
NOTE:

Use new clamps when installing the vacuum line.