Hydraulic System, Bleeding With Brake Charger/Bleeding Unit: Procedure: Notes

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the plenum chamber cover. Refer to BULKHEAD .

-- Fill the brake fluid reservoir with brake fluid up to the "max" mark.

Fig 1: Brake Fluid Reservoir

Courtesy of AUDI OF AMERICA, LLC

-- Connect the :VAS5234 or :VAS6860 to the :VAS5234/1 .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the protective cap -1- from the respective brake caliper bleed screw and attach the container bleed hose to the bleed screw.

Fig 2: Identifying Bleeder Screw Cap

Courtesy of AUDI OF AMERICA, LLC