LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1303 (Hydraulic Components - Brake System (Cabriolet)) >> 47 Hydraulic Components >> Front Brake Caliper >> Overview - Front Brake Caliper >> Protective Cap And Seal, Removing >> Removing

Protective Cap And Seal, Removing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Carefully pry the protective cap -1- and the seal out of the brake caliper with the -VAS40338- -2- using gentle lever movements, and do not damage the groove for the protective cap in the brake caliper while doing so.

Fig 1: Prying The Protective Caps
GWWA00-11206Courtesy of AUDI OF AMERICA, LLC


-- Carefully pry the protective cap -1- and the seal out of the brake caliper with the -VAS40338- -2- using gentle lever movements, and do not damage the groove for the protective cap in the brake caliper while doing so.

Fig 1: Prying The Protective Caps
GWWA00-11206Courtesy of AUDI OF AMERICA, LLC


-- Carefully pry the protective cap -1- and the seal out of the brake caliper with the -VAS40338- -2- using gentle lever movements, and do not damage the groove for the protective cap in the brake caliper while doing so.

Fig 1: Prying The Protective Caps
GWWA00-11206Courtesy of AUDI OF AMERICA, LLC