Brake Rotor, Removing And Installing, Ceramic Brakes 1LW: Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Clean the contact surfaces on the wheel hub and brake rotor. Remove any corrosion.

-- Place the brake rotor on the hub.

NOTE:

When positioning the brake rotor, do not tilt it on the wheel hub.

-- Install the bolt -6- and tighten it to 5 Nm.

Fig 1: Exploded View Of Front Brake Caliper Assembly, Ceramic Brakes

Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

-- Install The Wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.