Brake Rotor, Removing And Installing, 1LA, 1LB, 1LJ And 1LD 1ZT + S4 /S5: Removing
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Lift The Vehicle.
-- Remove the wheels.
-- Remove the brake caliper with the brake pads and front brake carrier. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, 1LA, 1LB, 1LJ AND 1LD 1ZT + S4 /S5 .
Do not let the brake caliper with the brake carrier hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.
-- Remove the bolt -arrow- on the brake rotor while holding the brake rotor firmly.
-- Remove the brake rotor.
NOTE:
When removing the brake rotor from the wheel hub, do not tilt the brake rotor.